CompAir air compressor accessories

Why refine compressed air?

The damaging and corrosive properties of water are well known. Untreated air at atmospheric pressure contains large amounts of water and other contaminants such as oil droplets and dirt particles. When the air is compressed the concentration of moisture and other contaminants increases. If allowed to remain in the system this corrosive mixture has a detrimental effect on pneumatic equipment, causing unnecessary production downtime, product spoilage and reduced equipment life.

The air flows of CompAir's F-series dryers have been carefully matched to the requirements of the CompAir range of compressors, ensuring optimum performance, and guaranteed dew points. Environmentally friendly refrigerant and insulation are standard across the range.

FH Series
F4H to F30H Models are for flow rates upto 3m³/min and pressures upto 16 bar. F40H-F1100H are for flow rates upto 110m³/min and pressures upto 12 bar. A modulating hot-gas bypass valve ensures optimum dew point control under all operating conditions. The pressure actuated control immediately reacts to variations in air flow guaranteeing the dew point.

FT Series
The FT Series from CompAir goes step further. With it unique energy-saving “TTS” technology, it combines respect for the environment with the opportunity for significant reductions in running costs compared to a conventional refrigeration type dryer. They perform within a wide range of ambient and compressed air temperatures, giving optimum performance whatever the application.

Downloads

FH-series refrigerant dryers literature
FT-series refrigerant dryers literature

This range incorporates:
A-series Twintower Dessicant dryers heatless
A-series Twintower Dessicant dryers heated
A-Series Modular Dessicant dryers heatless
A-Series Modular Dessicant dryers heatled

Please download the brochure and technical databook below for more information on these products

CompAir desiccant air dryers utilise the most up to date technology, to give pressure dew points of -40^oC as standard and by appropriate flow de-rating -70^oC; a vital requirement for industries demanding the ultimate in air quality. Desiccant dryers work on the principle of adsorption of water vapour through a desiccant bed.

The basis of the unique construction is a bed of desiccant material in a pair of chambers. the beds are used and regenerated in an alternating sequence. Two operation systems are available, they differ in the method of drying - or regenerating the desiccant material. Heatless version utilise a percentage of the dried air (purge) for regeneration.

Heat regenerative versions use electrically operated heater discs to supplement a reduced purge air to provide more efficient regeneration. A modular design give total installation flexibility to match specific customer requirements.

Downloads

CompAir's wide range of compressed air filters remove oil, water and dirt particles before the air reaches point of use. The filters offer maximum protection against contaminants down to 0.01 micron in size and can remove oil down to less than 0.003mmg/m³ .

Liquid is removed by automatic drains fitted as standard. Safety and strength are ensured are ensured by lightweight cast aluminum, and for higher flow rates, fabricated steel housings. For maximum life and minimum maintenance, all CompAir filters are protected internally and externally against corrosion. To meet varying requirements CompAir filters are available in five filtration grades;

Grade A - Pre filtration,
Grade B - High efficiency general purpose protection,
Grade C - High efficiency oil free protection,
Grade D - Activated carbon filtration,
Grade E - General purpose dust filtration.
 

Downloads

CA-series compressed air filters literature
filters literature USA only

Condensate drains

Removal of condensate using drain valves is simple, however a hidden cost of many types of drain valve lies within their operation, that they also discharge compressed air with the condensate. The CompAir solution is a range of electronic level sensing drains that detect and drain only when condensate is present. Intelligent operation always ensures no unnecessary loss of valuable compressed air. The CompAir drains are a reliable, easy to install cost effective solution for condensate removal, removal with a model to suit every system or application.

CS-series oil/water separators

Discharging oil contaminated condensate from compressed air systems is not only harmful to the environment, it is probably illegal. Efficient on site disposal of compressed air condensate is possible with the CompAir CS-series of oil/water separators.

These oil/water separators effectively reduce the oil concentration in the water to a permitted legal disposal limits, this allows the larger volume of clean water, up to 99.9% of the total condensate, to be safely discharged into the environment. The relatively small amount of concentrated oil can be disposed of in a legitimate and economical manner.

Downloads