CamAir Desiccant Compressed Air Dryers

In-Line Desiccant Air Dryers  (D05-02 through D25-06)

FEATURES

• Available in capacities from 10 to 50 scfm
• Compact sizes are ideal for portable or original equipment
• Drying efficiency can be tailored to your needs down to -45°F pressure dew point
• Highly visible color change from blue to pink through exclusive sight-glass highlights the need for service
• Exclusive hard spherical bead resists attrition and dusting and can be recharged
• Exclusive intake flow design takes air through entire supply of desiccant for maximum drying capacity
• Built-in particulate after-filter prevents downstream dust
• Needs no electrical connection
• No "purge air" lost as with regenerative dryers

SPECIFICATIONS

APPLICATIONS
  Always install an F5 coalescing filter upstream of the D05, D10 & D25.
  For compressed air service only.
  Not to be used on life support systems or breathing air systems.
  Dry air for parts blow off.
  Paint spray systems.
  Air gauging equipment.
  Laboratory air.

FREE SHIPPING ON ITEMS BELOW
In-Line Desiccant Air Dryers

Pipe Size	Model No.	Max. Flow SCFM     SCF		Desiccant Weight Lbs.	Desiccant Charge	Dimensions (Inches) Width      Height		Weight (Lbs.)	Price
3/8"	D05-03	.5-5	830	5/8	10 oz.	3 3/4	8 1/4	2.7	$85.70
1/2"	D10-04	5-15	2500	1 1/4	1 Qt.	4 7/8	8 7/8	5	$144.00
1/2"	D10-04XL	15-25	5000	2 1/2	2 Qt.	4 7/8	13 1/2	7	$196.20
3/4	D25-06	25-50	12500	6	1 Gal.	6 3/4	17 3/4	23	$629.00

StageAir Drying System

The StageAir Drying System is a point-of-use drying system and is protected by an OSHA Lockout valve which exhausts all downstream pressure when closed, and can be locked in the closed position with customer supplied padlock, exhaust 6 SCFM at 100 PSIG to prevent element damage.

HOW IT WORKS

     FIRST AND SECOND STAGE

• The StageAir desiccant air drying system begins with the dual stage integral filter/regulator
• First, the air enters the particulate filter, which has a 5 micron cleanable sintered bronze element. In this stage, corrosive moisture, pipe scale, dirt and rust are removed from the air line protecting the precision parts in the regulator.
• Next, the air enters a high-performance regulator, which reduces primary pressure to a desired pressure setting.

    THIRD STAGE COALESCING FILTER

• During Stage 3, fine filtration takes place. Here, 99.99 percent of oil aerosols and microscopic particles down to .01 micron absolute are removed from the air. The pop-up indicator alerts customer that an element change is necessary.

   FOURTH STAGE DESICCANT AIR DRYER

• As the air enters the desiccant dryer, it is dispersed through a 70 micron element. The element distributes air evenly through the desiccant bed. The desiccant absorbs the water vapor from the air, producing a –40¡F pressure dew point.
• To remove traces of desiccant dust before the air leaves the system, the air passes through a 40 micron filter element. The air is now clean and dry, and has been properly treated for use with your air operated system.
• The clear indicator sight glass shows a color change in the desiccant from blue to pink which indicates a desiccant recharge.

Note: When pressurizing open slide valve slowly to prevent element burst.

OPTIONS
To order options for the VC7500 series, simply add the appropriate suffix, as listed below, to the part number in the alphabetical/numerical order.

-3   3 micron absolute element (particulate filter)
F    Float drain

J    Overnight Drain

KITS

Applications
Paint Spray
Air Gauging Equipment
Lab Air

FREE SHIPPING ON ITEMS BELOW
StageAir

Pipe Size	Model No.	Max. Flow SCFM     SCF		Desiccant Weight Lbs.	Dimensions (Inches) Width      Height		Weight (Lbs.)	Price
1/2"	VC7510	5-15	2500	1 1/4	14 1/4	11 1/4	10	$375.00
1/2"	VC7510XL	15-25	5000	2 1/2	14 1/2	16 1/4	13.5	$425.00
3/4	VC7525	25-50	12500	6	16 1/2	20 1/8	24.25	$829.00

Mini In-Line Desiccant Dryer (-40°F Dew Point) (DFD-10)

Used at the point-of-use, this patented, disposable, mini in-line desiccant dryer removes all traces of water vapor, oil vapor and dirt. It is often used directly upstream of blow guns or spray guns as final protection for critical parts blow off and paint spraying. Install in either direction; it functions in both directions. A 40 micron, porous bronze element removes fine dirt particles, an oil removing media removes oil vapor, and desiccant beads adsorb water vapor. The see-through housing shows desiccant color change, which indicates that the dryer needs to be replaced.

2 per pack FREE SHIPPING

Price $26.40

Desiccant Air Dryer and Filter Package FDP25

Size, capacity:	8 W x 28 H in
Weight:	30 lbs
Price:	$439.00  Free Shipping

Features: High Efficiency Coalescing Prefilter with stainless steel construction Final built-in after filter, prevents desiccant fines from going downstream Solid metal bowls and housing In-line mounting Moisture Indicator Silica gel desiccant which changes color when saturated Maintenance Kit  Model # HSG4  $99.00 Replacement Silica Gel Desiccant (each kit good for 2 changes) Replacement Element  Model # E516  $39.00 Virtually contaminant-free air Economical and low maintenance Ideal for painting and protecting air tools Produces -45 degree F atmospheric dew point Removes solid particles to 0.01 micron Removes 99.99 +%of oil aerosols