Industrial Air Compressors from Pacific Air Compressors

Drying Systems - LFT/LFE/LFA Series

Catalog
View / Download 1.3 meg - Rev. 4/00

Manuals:

LFT Series
View / Download 1.8 meg - Rev. 12/02

LFE Series
View / Download 596 kb - Rev. 1/03

LFA Series
View / Download 256 kb - Rev. 12/02

Ultra Air Heatless Regenerative Dryers delivers a -40 F PDP, a dewpoint lower than that required by the Instrument Society of America. In colder climates, weather can negatively affect productivity by literally freezing and completely blocking outdoor air lines. Instrument air requires a quality of air that only a Regenerative type dryer can deliver. Therefore, whenever lower dewpoints are required for outdoor piping, instrument air, process air or gas drying, the Ultra Air Regenerative Dryings are the perfect solution.

Features:

Generous quantities of activated alumina desiccant
Centrally mounted pressure gauge and relief valves on each tower
ASME inspected and stamped and CRN registered pressure vessels (100 CFM and above)
Purge air mufflers to reduce exhaust noise
115-160, NEMA 4x electrical
Repressurization of regenerating tower before it goes on drying cycle to prevent desiccant dusting.
-40º F pressure dewpoint (lower dewpoint available)
Control air filter
Low pressure drops (3PSID maximum)
Fail safe mode
Dryer sequence lights
Reliable and proven inlet air control valves and purge valves assure years of reliable shifting of towers and proper dryer operation (Lifetime Warranty) LF Series 25-620 CFM.
1 year warranty
NEMA 4x

Pacific Air Compressors
981 NW Corporate Drive
Troutdale, OR 97060
Tel: (503) 674-2744
Fax: (503) 674-2883
sales@pacificaircompressors.com