HankisonŽ
M Series mist eliminators offer a low cost way to remove oil and
water aerosols from a compressed air system
- Protect products and processes from contamination
- Increase the life of pneumatic equipment
- Help eliminate paint appearance and adhesion problems
- Keep Pneumatic instruments operating
Low Operating Costs
- Low Pressure drop: 0.5 to 1 psi (0.04 to 0.07 kgf/cm˛)
Typical coalescing filters operate at 3 to 6 psi (0.21 to 0.42
kgf/cm˛) requiring the air compressor to operate at higher
operating pressures, increasing power requirements
- long element life: 8 to 15 years
with a large in-depth bed, element life is much longer than
conventional oil removal filters
- Virtually maintenance free
Extra Protection
- Captures and retains large slugs of oil and water. Protects
downstream equipment from contamination should oil separator
on rotary screw compressor fail.
Removes submicronic particles for ultra clean
air
- 100% of particles 3 microns and larger
- 99.98% of particles 0.1 micron and larger
- 0.5 ppm w/w maximum liquid content after
filtration
- 1000 ppm maximum inlet liquid loading
Home
| Next Page
|

|
|
Pacific Air Compressors
981 NW Corporate Drive
Troutdale, OR 97060
Tel: (503) 674-2744
Fax: (503) 674-2883
sales@pacificaircompressors.com
|
|