PAH 20-75 Specifications

MODEL PAH 20-75
High Inlet Temperature Air Dryers

• Cools...accepts high temperature air to 180°F, 82°C directly from your air compressor...no separate aftercooler and separator required
• Dries...removes moisture...eliminates troublesome water from downstream air lines and equipment
• Cleans...an integral 3 micron filter removes solid contaminants and 60% of oil aerosols (for virtually oil free air, high efficiency oil removal filters are available)
• CSA Certified - 115V models
• CFC FREE - Uses minimum amount of environmentally acceptable refrigerant

^x Standard 3 micron filter.

(1) Rated Flow Capacity - Conditions for rating dryers are in accordance with CAGI (Compressed Air and Gas Institute) Standard ADF 100: Refrigeration Compressed Air Dryers - Methods for Testing and Rating. Conditions for rating above dryers are: compressed air at dryer inlet: 100 psig (7 kgf/cm²) and 100°F (38°C); operating on 60 Hz power supply with aftercooler upstream. Outlet pressure dew point at rated conditions is 38°F (3°C) and pressure drop is less than 5 psi (0.34 kgf/cm².

(2) At 35°F (2°C) evaporator and 100°F (38°C) ambient.

(3)NPT and BSP connections available.

Note: Maximum operating pressure: 175psig (12.3 kgf/cm²; Maximum operating temperature: 180°F (82°C).